golf coaster help page
Click on the picture to enlarge.
The Frame.
Steering.
Crank
|
|
|
|
|
|
crank brace |
|
|
|
place the threaded bolte through the the frame and fasten with the nut. now install the elastic stop nut and run it down. Place the strut over the threads, back off stop nut until the strut supports the crank. |
|
|
|
Rear Suspension
|
|
|
|
|
|
|
left side |
|
|
|
|
|
|
|
Seat
|
|
|
|
|
This brace greatly increases the weight capacity on the cycle. it is centered on the bottom by the brake attaching bolt |
|
|
|
|
Top
electric wheel . install the wheel with the wires to the inside. than reverse
the connections so the wheel will drive forward. you may be able to run the
wires in side the frame, if not use plastic loom .
|
|
|
|
wires are run in plastic loom |
|
|
|
note backet to hold battery carrier from wilderness energy |
|
|
|
hose clamp to hold front of carrier |
|
|
|
note throttel and key switch set in tee 1x1x3/4" |
|
|
|
